The Smart iBEC provides regulated, adjustable power for gas engine ignition modules. Advanced electronics filter noise from the ignition to ensure reliable radio operation and 7 stages of carefully selected powerline based suppression and absorption ensure that should your ignition unit ever fail and send high voltage back through the power lines that the RX will be completely protected. 

• The Smart iBEC works with all major radio systems and uses the time proven RCLightSystems multi-channel software, this also allows the iBEC to generate throttle output from the Aux port to simplify installations. Yes, the throttle servo plugs directly into the iBEC freeing up a servo channel on the Rx itself.
• RPM telemetry is provided, the Smart iBEC connects to the tacho port on the ignition module and provides 4 stages of protection and isolation before capturing the signal and converting to the appropriate telemetry protocol. As well as RPM telemetry the iBEC also provide current measurement so you can see how much of your flight pack is being consumed by the ignition module. 
• The Smart iBEC is provided with an ultrabright green, Red or Blue LED. 
• The Smart iBEC is provided configured for PWM operation by default.  
• An optional mounting kit and optional wire packs available 

The Smart iBEC provides the features you want and the protection you need. 

• Running an ignition BEC saves the weight of a dedicated ignition pack, the Smart iBEC not only gives this weight saving but also provides RPM telemetry so you can be sure you are getting the best from your engine. 
• The Smart iBEC can work with many ignition systems including DA and RCEXL. 
• You can use this as a simple iBEC providing switchable, regulated power, or as a complete hub for your engine providing control of your throttle servo and ignition and also providing telemetry. 
• The Smart iBEC is tough and will protect your RX  and other radio components from any noise or HV failure the ignition could cause. 
• The Smart iBEC includes ultrabright LEDs both internally any to mount on the airframe so you can always tell the ignition state. 

Tech Specs

• Input voltage: 5.9 to 8.4v
• Output voltage: 6v or 'max' 
• Current: 2A continuous, 3A maximum
• Power line protection: 7 stage, 3 zone, 1.8KW absorption
• Noise suppression: 5 stage  
• Weight: 19.6g
• Size: 78mm x 30mm x 14mm
• Operating temperature: -5°C to +85°C
• Radio systems: Spektrum (SRXL2, SRXL), Futaba (SBus2), JR DMSS (XBus or PWM/Sens), Jeti (ExBus and PWM/Ext), PowerBox Core, FrSky (SBus or PWM/S.Port), Generic PWM
• Note that 'max' voltage is input minus 0.2v