This is a complete and ready to Fly Plug n Play aircraft - includes Motor, esc, servos etc all pre-installed. It also comes with pre-installed LED lighting so you can light up the sky at night! All you need is your own Tx, Rx and 2200mah 3s Lipo

TECH SPECS

Wingspan: 54 inch ( 1372 mm )

Length of fuselage: 49 inch

All up weight: 1.6-1.7 kg

PROP AND BATTERY :

14x7 recommended for 3s Falcon 14X7E

13x6.5 recommended for 4s Falcon 13X6,5E with GENS ACE 2500MAH 14.8V

MOTOR SPECS:

KV: 1100 Max

Continuous Current: 63.8A/10s Max Continuous

Power: 944W

Input cell number (lipo): 3s 2200mah or 4s 2200mah

SERVO:

Metal Gear
Speed(8V): 0.09s
Torque (8V): 3.5kg
Bearing Type: Dual Ball Bearing

Horn Type: 25T

PROGRAMABLE ESC:

2S-4S operation

60A with a burst up to 80A

5Amp/8V Sbec (Deans plug)

Kit Contents
All images below show the SLICK model. This also applies to MXS!

- Fuselage including canopy with pre-installed motor, ESC, LED lights, rudder - elevator servo,
pull-pull cables and elevator pushrod - Right Wing Panel with pre-installed Aileron, servo, linkages and LED - Left Wing Panel with pre-installed Aileron, servo, linkages and LED
- One piece Horizontal Stabilizer with pre-installed Elevator and LED
- Rudder with hinges pre-glued - Carbon Fiber Wing Tube
- ABS Plastic Painted Cowl – pre-drilled and aligned with fuse
- Carbon Fiber pre-assembled Landing Gear with wheels and wheel pants
- Tail wheel – pre-installed on fuselage
- Aluminum back plate cooling spinner with adaptor
- Propeller 14 X 7 with prop adaptors
- 2 pieces SFG with spacers
- 6 inches adhesive backed Velcro
- 2 pcs Velcro strap
- Hardware bag (this includes the screws for the Cowl and SFGs and additional spares) - 4 packs of servo arms (these are spare and not needed as all servos are pre- itted with CNC aluminum RCG servo arms) - 2 X 10cm servo extensions for Aileron – RX connection - LED one to three lead connector
- Additional stock motor spinner (this is spare)
- C-clamps for motor shaft servicing

Building Manual is here

For a great review on Flying Giants click here

owen vuyk	03/12/2018
I was fortunate enough to get a chance to fly one of these and all I can say is ''WOW''. I normally don't have high expectations for small RTF foamies but this one exceeded all my expectations. The plane flies more like a balsa/ply aircraft than a foamy. It's great for 3D right out the box and does almost anything you want. Low and slow handling is great and if you prefer XA aerobatics it does that great as well. Power is great on a 3s setup, it would be best to use a large 3s battery or two batteries in parallel to get a decent flight time. With 3600Mah we got about 5mins flying time. This plane is definitely a keeper