Tech-Aero - Ignition Battery Eliminator Circuits for CDI ignitions ( IBEC) - includes opto kill switch amongst its great features

Every Tech-Aero Ultra IBEC HV is assembled  at our US based electronics assembly house with the highest of quality standards         

..download the full user manual here.....

 (remember this saves you both the cost of an additional ignition battery as well as a seperate opto kill switch) also means there is one less battery to charge and less weight in the airframe.

”Ultra IBEC HV” Features

Eliminates the need for a separate ignition battery and mechanical on/off ignition switch. Compatible with the power requirements of single and multi-cylinder model CDI ignition

modules via jumper selectable 5.9V, 6.3V, 7.3V and 8V voltage outputs. Enhanced flexibility and safety via transmitter control of CDI ignition power from a

spare receiver auxiliary channel.

Tech-Aero exclusive 4 stage filtering that includes signal lead optical isolation removes interference from CDI ignition noise in the wiring path to the receiver, permitting use with 2.4 GHz Spread Spectrum and 72 MHz FM radio receivers. *

o Filter stages 1 & 2: An advanced 2nd order common mode LC power lead filter.

o Filter stage 3: Triple power filter capacitors form a low pass filter and enhance peak impulse current delivery to the CDI module.

o Filter stage 4: An optical isolator circuit prevents any stray noise from feeding back into sensitive receiver electronics via the signal lead.

A high precision, very low dropout power regulator design further assures power receiver bus isolation with superior performance during peak current demand.

One IBEC model fits all: compatible with all battery chemistries commonly used for radio control use, with a practical input voltage range from 6V to 8.4V. A 2S LiPo / LiIon receiver battery or equivalent supply voltage is recommended overall and is required for 7.3V and 8V operation. 2S LiFe and 5S NiCad /NiMh batteries are compatible with the 5.9V or 6.3V output settings. 4 cell NiCad / NiMh batteries can be used with some legacy CDI’s, but will not be voltage regulated at the IBEC output.

Bright 5mm LED CDI power on/off indicator with mounting bezel. Available LED colors are red, green, blue, amber and white.

High reliability Surface Mount components reduce weight to 0.8 oz and size to 1 x 1 ¾”. Heavy duty 22 gauge twisted wire power extensions.

* Always follow receiver manufacturer range testing guidelines prior to flight!

Copyright 2018 Tech-Aero Designs LL


Write a review

Please login or register to review

Tech Aero Ultra IBEC - HV (High Voltage) Green LED

  • Brand: tech-aero
  • Product Code: Tech Aero Ultra IBEC - HV (High Voltage) Green LED
  • Availability: Out Of Stock
  • CMC Product ID: 1746
  • R1,399.00

  • Ex Tax: R1,216.52

Related Products

EX123 - 123cc Engine with EFI

EX123 - 123cc Engine with EFI

This is the EX 123 - Engine with EFI The ultra reliable GP 123cc is now available in an EFI vers..

R124,756.00 Ex Tax: R108,483.48

Tags: tech aero ultra ibec HV

Latest

ARF - CESSNA 182 V2

ARF - CESSNA 182 V2

EPOmaterialWingspan: 1410mmLength: 1100mmWeight: 1400gServo: 9g x 6ESC: 30AMotor: 3536 Brushless out..

R4,359.00 Ex Tax: R3,790.43

LiPo 3400mah 2S1P - X-Power 25C

LiPo 3400mah 2S1P - X-Power 25C

This is a Hardcase LipoNew XPower G3 Series high performance Lithium Polymer (LIPO) battery.Specific..

R596.00 Ex Tax: R518.26

CYS S3003 - 3Kg Standard Size Analog Servo

CYS S3003 - 3Kg Standard Size Analog Servo

CYS S3003 - 3Kg Standard Size Analog ServoApplication&FeaturesType AnalogWeight 36g±1gSize 40.8*..

R137.00 Ex Tax: R119.13

NiMh - 6.0V 1700Mah Gens Ace

NiMh - 6.0V 1700Mah Gens Ace

NiMhL = 85mmW = 30mmT = 17mmWeight = 116g ..

R202.00 Ex Tax: R175.65

Charger - C1/EV650 Balance charger - EV Peak

Charger - C1/EV650 Balance charger - EV Peak

The EV-Peak EV-650 charger was designed with an effort to provide everything needed for charging "un..

R540.00 Ex Tax: R469.57

Powerbox -  120cm Extension for SensorSwitch Order No.: 3558

Powerbox - 120cm Extension for SensorSwitch Order No.: 3558

Extension for Sensor Switch 120cm..

R508.00 Ex Tax: R441.74