Features

14 channels
High-performance battery backer with high continuous load capacity
Duplicated circuitry for the entire power electronics
Redundant electronic switch
All features can be controlled using PowerBox and Jeti transmitters
All systems can be operated using BlueCom or PowerBox USB
Integrated iGyro technology of the latest type, with iGyro Sat as gyro sensor
Nine independent gyro outputs for: 3x aileron, 3x elevator, 3x rudder

Technical Data

Operating voltage	4.0V - 9.0V
Power supply	2S LiPo/LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state	105mA
Current drain Standby	30µA
Maximum load current	Continuous 2x10A ( <30s 2x20A )
Drop-out voltage	0.3V
Output voltage	unregulated
Signal input	serial

Supported RC systems	PowerBox, Jeti, Futaba
Receiver redundancy	SRS
Channels	26
Servo sockets	14
Servo signal resolution	0,5µs
Signal frame rate	10ms, 12ms, 14ms, 16ms, 18ms
Gyro regulation	Heading- and Normalmode
Gyro sensor type	external iGyro Sat
Number of sensor axes	9
Supported telemetry systems	P²BUS, Ex-Bus, S.BUS2
Dimensions	63 x 44 x 12 mm
Weight	40g
Weight Sensor Switch	6g
Temperature range	-30°C to +75°C

Set contents

PowerBox Pioneer
MicroSwitch
2 patch leads
1 double-sided self-adhesive pad
Operating instructions in german and english

MicroMag

Product description

The PowerBox Pioneer is the latest development of a 14-channel power supply unit without voltage regulation, designed for HV servos. Since the unit has no voltage regulators, nor the large heat-sink surfaces required for them, it offers ultra-compact dimensions. Even so, the Pioneer still provides redundancy, as is the standard for all power supply units made by PowerBox-Systems. The output section and the switch controller are duplicated in order to guarantee maximum security.

A feature which makes the Pioneer unique in its class is its integral iGyro technology, which requires only the optional iGyro Sat as sensor unit. When plugged in, the sensor transforms the power supply unit into a high-performance 9-axis gyro of the latest generation. The integrated iGyro is ultra-simple to use, and can be set up in just a few minutes, ready for the initial trimming flight. The Pioneer offers any number of facilities for fine-tuning, making it suitable for complex models and perfectionists. Stick priority, lock-in feel and gyro characteristics can be adjusted separately for each axis and for two ranges, to name just the most important of them.

The whole package is rounded off by convenience and ease of operation, as PowerBox and Jeti pilots can set up and control all aspects of the Pioneer from the transmitter! Optionally - and for Futaba pilots - the Pioneer can be set up using the BlueCom adapter and the smartphone app, or using a PC in conjunction with the USB interface.

In performance terms the compact Pioneer concedes nothing to the larger backers. Many series of tests have been carried out with a 40A load for several minutes, and we guarantee a continuous current capacity of 20A. The elegant aluminium heat-sink ensures the necessary heat dissipation, and even the external switch is supplied in a top-quality anodised aluminium case, machined from solid.

As a further option, the new Pioneer is also available with the MicroMag magnetic switch. This switch can be installed visible or hidden and switched on with the included magnet.