**This pylon racer reaches speeds well over 100 mph (160 km/h)**
**when equipped with the recommended racing power system,**
**and should only be flown at an approved AMA flying site.**

Construction: Built-up balsa and ply, internal V-tail linkages for
less drag
Wing: One-piece wood and foam construction, semi-symmetrical
configuration
Covering: Top Flite MonoKote, all white to enable pilot to design
their own trim scheme
Wheels: Low drag nylon
Engine Mount: Aluminum
Fuel Tank: 6oz (180cc)

Prebuilt and Covered Wing, Fuselage and Tail Assemblies with Wheels,
Engine Mount, Hardware Package and Instruction Manual

Radio: 4-channel with V-tail mixing
Servos: Four mini, 50 oz-in minimum torque
Engine: .40-.55 2-stroke
Building and field equipment

Length: 40.5" (1030mm)
Wingspan: 52" (1320mm)
Weight: 3.6 - 3.75lbs (1630 - 1700g)
Wing Area: 503 sq in (32.4 sq dm)
Wing Loading: 16.5 - 17.2 oz sq/ft (50 - 52.5 g/sq/dm)
Wing Type: Semi-symmetrical
Center of Gravity (CG): 3" (76mm) back from the leading edge of the
wing measured at the fuselage
Control Throws: Low Rate High Rate
Elevator: 5/32" (4mm) 7.3° 7/32" (6mm) 10.2°
Rudder: 1/8" (3mm) 5.8° 7/32" (6mm) 10.2°
Ailerons: 5/32" (4mm) 7.2° 7/32" (6mm) 10.2°